Kyocera FS-1020MFP Operation Manual page 48

Scan Tab
1
2
3
4
9
10
12
No. Item
1 Name
2 Original size
3 Original image
4 Reverse image
5 Sharpen
6 Scan color
7 Density
8 Resolution
9 Output name
10 File format
Description
Set a name for the Program. Up to 18 characters can be entered.
Specify the size of originals being scanned.
Value: Executive, Letter, A4, A5, A6, B5 (JIS), B5 (ISO), Custom, 16K, Statement
Note Refer to Configuration on page 2-36 for selecting Custom.
Select image quality suited to the type of original.
Value:
Text + Photo Photo
When this is selected, the image color reverses.
Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the
sharpness.)
Select the color mode setting.
Value: Monochrome, Grayscale, Full color
Select the density.
Value: Lighter (-3), Lighter (-2), Lighter (-1), Normal (0), Darker (+1), Darker (+2),
Darker (+3)
Select fineness of scanning resolution.
Value:
200×200 dpi 300×300 dpi
Assign a document name to scanned images. When there are multiple pages, a
three-digit incrementing number such as Scan_001, Scan_002... is appended to the
end of the file name. Up to 16 characters can be entered.
Specify the image file format.
Value: BMP, JPEG, PNG, TIFF, PDF
Text
400×400 dpi
2-32
Preparation
5
6
7
8
11
600×600 dpi