Replacement Procedure Choice Guide; Replacement Of Handset With The Ims2; Data Included In A Replacement Transfer - ASCOM d41 DECT Configuration Manual

Configuration Manual
Ascom d41 DECT Handset
4.6

Replacement procedure choice guide

Depending on situation, two different replacement procedures can be chosen;
replacement via PDM/IMS2 and Easy Replacement. Use the following list as a guide to
choose which procedure to use.
• If a handset needs to be replaced due to for example a broken display, see User
Manual, Ascom d41 DECT Handset, TD 92582GB.
• If the electrical connection is damaged, it might not be possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via
PDM/IMS2, see
Replacement of the handset with the PDM Windows Version
• If two handsets and their settings shall be switched between two users, follow

Replacement of handset with the IMS2

with the PDM Windows Version
4.7 Replacement of handset with the IMS2
Both the old handset and the new handset must be of the same device type (d62 or d41).
The same extension number is assigned to the new handset.
Make sure that the old handset is saved in the IMS2. Start the Device Manager in the IMS2
and navigate to the "Numbers" tab. There shall be a tick in the "Saved" column for the
old handset.
If the handset is not saved, insert it into a desktop charger or rack charger connected to
IMS2 and perform a save, see Installation and Operation Manual, IMS2, TD 92586GB.
If it would be impossible to save the old handset settings, stop this replacement
procedure. Instead unsubscribe the old handset from the PBX, register the new handset
and follow the instructions for installing a handset, see
on page 5. When the handset is saved, unsubscribe the old handset from the PBX.The
following steps are described in two different scenarios, check which one suits the best
before proceeding.
4.7.1

Data included in a replacement transfer

The following data is replaced during a replacement with IMS2:
• User parameters (including User ID)
• Contacts (entered by the user)
Note that the following data is not replaced:
• DECT registration
• Call list
• Company phonebook
• Downloaded Language
• Licenses
1. A handset's product license (that is, d41 Advanced) can be moved to a d41 Basic using the Move license function in
the IMS2.
2010-01-28/ Ver. D
4.7 Replacement of handset with the IMS2
1
on page 11 or 4.8 Replacement of the handset
on page 12.
3.2 Installation of a new Handset
TD 92641GB
on page 11 or 4.8
on page 12.
4.7
11