Ransburg 75785 Service Manual page 37

If the low voltage cable is to be re-
>
placed, see "Low Voltage Cable Replace-
ment".
4. Loosen the low voltage cable nut from the plug
assembly with a wrench and unscrew the nut by
hand. Remove the low voltage cable by pulling it
from the low voltage cable plug assembly.
5. Remove the applicator from the work site.
AH-94-04.7
REA-90 and 90L Spray Applicators - Maintenance
N O T E N O T E N O T E
N O T E N O T E
Figure 5: Solvent Base Applicator Connections Figure 5: Solvent Base Applicator Connections Figure 5: Solvent Base Applicator Connections
Figure 5: Solvent Base Applicator Connections Figure 5: Solvent Base Applicator Connections
N O T E S N O T E S
N O T E S N O T E S N O T E S
Item # Item #
Item # Item # Item # Description Description
Description Description Description
71 Fluid Hose Assembly
71 Air Hose Assembly
77 Low Voltage Cable
3 2 3 2 3 2 3 2 3 2