Ransburg 75785 Service Manual page 10

REA-90 and 90L Spray Applicators - Safety
A R E A A R E A A R E A
A R E A A R E A
Tells where hazards
may occur.
Spray Area Spray Area Spray Area Spray Area Spray Area
5 5 5 5 5
H A Z A R D H A Z A R D H A Z A R D H A Z A R D H A Z A R D
Tells what the hazard is.
Electrostatic Arcing
SAFEGUARDS SAFEGUARDS SAFEGUARDS SAFEGUARDS SAFEGUARDS
Tells how to avoid the hazard.
Never operate the spray applicator without properly
grounding the following.
A. Operators
Operators must be grounded. Rubber soled
insulating shoes should not be worn. Grounding
leg straps may be used.
Operators must maintain contact with the
handle of the applicator. If work gloves are used,
the palm section should be cut out.
Operators must remove from themselves all
metal objects that are not grounded.
NOTE: NOTE: NOTE: REFER TO NFPA-33 REGARDING
NOTE: NOTE:
OPERATOR GROUNDING.
B. Parts being sprayed. Resistance between the
part and a grounded conveyor must not exceed
1 megohm.
C. Every metal and conductive object in the spray
area. This includes the booth, parts hangers,
fire extinguishers, conductive flooring, etc.
Grounded conductive flooring must be provided in the
spray area.
Turn off voltage at the power supply before flushing
out, cleaning, or removing any parts from the
applicator.
Provide proper protection for waterborne supply
systems.
Never install a spray applicator into a fluid system
using an isolated solvent supply.
Always discharge Waterborne system capacitance
prior to servicing.
Do not touch applicator electrode while applicator is
energized.
AH-94-04.7