Handle; Fan Air Valve - Ransburg 75785 Service Manual

HANDLE

HANDLE
HANDLE HANDLE HANDLE
Removal Removal Removal
Removal Removal
1. Prior to working on the applicator handle, the
following procedures should be completed:
• Removal from Service
• Removal Fluid Tube and Fluid Hose
(for Solvent Base Applicators) or Fluid Hose
(for Waterborne Applicators)
• Removal Air Hose
• Removal Low Voltage Cable
• Removal Low Voltage Cable Plug
Assembly
• Removal Trigger
• Removal Barrel
• Removal Fluid Tube Bracket
• Removal Hook/Transformer
• Removal Fan Air Screw
• Removal Air Valve
• Removal Trigger Stop
2. The handle can now be completely
disassembled of all components. There are five
(5) pipe plugs that were installed at the factory and
should not be removed.
Cleaning and Inspection Cleaning and Inspection
Cleaning and Inspection Cleaning and Inspection Cleaning and Inspection
1. The handle can be cleaned and/or soaked in a
suitable solvent to remove all paint from the outer
surfaces and the interior passages.
2. The handle is very durable and usually not
damaged during normal operations. Examine the
handle for cracks, chips, and/or broken parts. If
any are noted the handle must be replaced.
AH-94-04.7
REA-90 and 90L Spray Applicators - Maintenance
Assembly Assembly Assembly
Assembly Assembly
1. To get the applicator ready to be placed back
into service, perform the following procedures.
• Install Trigger Stop
• Install Air Valve
• Install Fan Air Screw
• Install Hook/Transformer
• Install Barrel to Handle
• Install Fluid Tube Bracket
• Install Trigger
• Install Low Voltage Cable Plug
Assembly
• Install Low Voltage Cable
• Install Air Hose
• Install Fluid Tube and Fluid Hose (for Solvent
Base Applicators) or Fluid Hose for
(Waterborne Applicators)
• Placing Applicator Back in Service
F F F F F AN AIR V AN AIR V AN AIR VAL AN AIR V
AN AIR V
Item # Item #
Item # Item # Item #
AL AL ALVE VE VE VE
AL VE
Description Description
Description Description Description
35 Needle
36 Spring
37 Washer
38 O-Ring
39 O-Ring
40 Retaining Nut
41 Control Knob
Figure 18: Fan Air Screw Figure 18: Fan Air Screw Figure 18: Fan Air Screw
Figure 18: Fan Air Screw Figure 18: Fan Air Screw
4 4 4 4 4 4 4 4 4 4