Spray Pattern Adjustment; Applicator To Target Distance - Ransburg 75785 Service Manual

SPRA SPRA SPRAY Y Y Y Y P P P P PA A A A A TTERN TTERN TTERN
SPRA SPRA TTERN TTERN
ADJUSTMENT ADJUSTMENT
ADJUSTMENT ADJUSTMENT ADJUSTMENT
The spray pattern of fan atomizers is adjustable
from a small circle to an elongated oval,
approximately 10 to 18 inches of usable pattern
when sprayed from a target distance of 8 to 12
inches. The swirl atomizer assemblies produce a
round pattern from 5 to 9 inches in diameter. The
fan control knob provides control of the pattern
shaping air. Counter-clockwise expands the
pattern and clockwise reduces it. To change the
spray pattern axis of fan atomizers from horizontal
to vertical, loosen the retainer ring, rotate the air
cap clockwise to the desired position, and gently
tighten the ring.
C A U T I O N C A U T I O N C A U T I O N
C A U T I O N C A U T I O N
! ! ! ! !
A counter-clockwise turn of the air cap
>
may loosen the fluid nozzle and cause air
to get into the paint or paint to cross over
into the air passages.
APPLICA APPLICAT T T T T OR T APPLICA OR TO O O O O OR T OR T
APPLICA APPLICA OR T
T T T T T ARGET ARGET ARGET DIST ARGET DIST DISTANCE DIST
ARGET DIST
Hold the applicator 6 to 12 inches maximum from
the target for best operation (higher transfer
efficiency will be achieved at the closer target
distance). Trigger the applicator fully to operate.
N O T E N O T E N O T E N O T E N O T E
See ITW Ransburg "REA Applicator
>
Spray Techniques".
AH-94-04.7
REA-90 and 90L Spray Applicators - Installation
ANCE ANCE ANCE
ANCE
N O T E S N O T E S N O T E S N O T E S N O T E S
2 4 2 4 2 4 2 4 2 4