Mitsubishi Electric FR-V520-1.5K to 55K Instruction Manual page 24

REMARKS
When using a conventional motor (SF-VR, SF-JR) or other motors, refer to the
Instruction Manual (detailed).
<At-a-glance guide to motor setting>
Parameter,
Jumper Con-
No. Item
necter, Ter-
minal
Motor
1 Pr. 71 setting
setting
Offline
2
tuning
1 :1
Capacity
3 Pr. 80 setting
setting
1 rank
lower
Number
4 of PLG Pr. 851setting
pulses
PLG
5 rotation Pr. 852 setting
direction
PLG
Power
power
supply
6 supply
PLG
specifi-
specifi-
power supply
cation
cation
jumper con-
necter on the Output
back of the circuit
PLG
control termi-
Termi-
7 output
nal
nating
type
resis-
tance
Elec-
tronic
8 Pr. 9 setting
thermal
relay
Across
Thermal
OH-SD
9 protector
input
Pr. 876 setting
Torque
10 charac- Pr. 801 setting
teristic
CAUTION
1. Set number of motor poles in Pr.81.
2. For -, make setting according to the motor used.
3. The half-tone screened cells are factory set.
4. Check the power supply specification of PLG and change a jumper connecter.
5. *:Perform offline auto tuning (mode without rotation) for the wiring length to be reflected on the con-
trol when the wiring length is long (30m or longer as reference).)
<When using other manufacturers' motors>
offline auto tuning (rotation mode) is necessary. Perform offline auto tuning with the motor alone before
connecting a load. If higher torque accuracy is required, perform online auto tuning next.
Offline auto tuning
The inverter measures necessary motor circuit constant and stores it to improve low speed
torque.
Online auto tuning
High torque accuracy corresponding to the motor temperature variation is available.
Dedicated Motor
Mitsubishi
SF-JR (with PLG)
SF-V5R
(2, 4, 6P)-
1500r/min SF-VR
2.2kW to 1.5kW or
series
55kW
30 30 0
Not Not Not
required * required * required * required *
INV INV INV
capacity capacity capacity
Motor Motor Motor
capacity capacity capacity
2048 1000 1024
1 1 1
12V 5V 5V
Compli-
Differential Differential Differential Differential
mentary
No Yes Yes
Rated
0 0 inverter
current
Connect to Connect to
Open
the thermal the thermal
1 1 0
0 or 1
(Selection (Selection
1 1
is
required)
20
Standard Motor
Mitsubishi
manufac-
SF-HR Others
(4P)-
(with PLG) (with PLG)
(with PLG)
less
20 3 to 8 3 to 8
Not
Required Required Required
INV INV INV
capacity capacity capacity capacity
Motor Motor Motor
capacity capacity capacity capacity
1024 1024 -
1 1 -
5V 5V -
-
Yes Yes -
Rated Rated
inverter inverter -
current current
Open Open -
0 0 -
0 or 1 0 or 1 0 or 1
(Selection (Selection (Selection
is is is
required) required) required) required)
Setting the motor
Constant-torque Motor
(with PLG)
Mitsubishi
Other
Other
SF-HRCA SF-JRCA
manufac-
turer
(4P) (with (with
turer
PLG) PLG)
3 to 8 10 13 to 18 13 to 18
Not
Required Required
required *
INV INV INV INV
capacity capacity capacity
Motor Motor Motor Motor
capacity capacity capacity
- 1024 1024 -
- 1 1 -
- 5V 5V -
Differen-
- Differential -
tial
- Yes Yes -
Rated Rated
- inverter inverter -
current current
- Open Open -
- 0 0 -
0 or 1
0 or 1 0 or 1 0 or 1
(Selec-
(Selection (Selection
tion
is is is
is
required) required)
required)
2