Alarm Setting - Fujitsu FI-5900C Operator's Manual
Image scanner
Hide thumbs
Also See for FI-5900C:
- Operator's manual (257 pages) ,
- Getting started (30 pages) ,
- Consumable replacement and cleaning instructions (24 pages)
Table of Contents
Advertisement
8.20 Alarm Setting
You can make the alarm to sound beeps when a jam or multifeed occurs, as well as disabling the alarm.
Configure the settings for the Alarm setting as follows:
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page
2.
Select [Device Setting 2] from left side list in the window, and select
[Alarm setting] from its lower level.
3.
Select "Enable alarm" to sound beeps when a jam or multifeed occurs.
Select "Disable alarm" to disable the alarm.
170.
8.20 Alarm Setting
8
201
Advertisement
Table of Contents
