Names And Functions Of Parts - Fujitsu FI-5900C Operator's Manual

1.1 Names and Functions of Parts

This section describes the names of parts.
■ Front side
No. Name
1 Stopper
2
Stacker side guide
3
Top cover
4 Stacker
5
Ejector
6
Operator panel
7
Stacker extension
8
ADF cover
9 ADF cover open button
10 Pre-imprinter cover
11
ADF
(Automatic document feeder)
12 Hopper extension
13 Hopper
14
Hopper side guides
15 Power button
2
1.1 Names and Functions of Parts
1 2
3
7
8
9
10
11
12
13
Prevents ejected documents from dropping off the scanner.
For aligning ejected documents to a certain width.
Cover to access the consumables storage box and Post-Imprinter
option (sold separately).
Documents will be ejected into the Stacker after scanning.
For ejecting the documents after scanning.
For operating the scanner.
For scanning long documents. Pull the extension out according to
the document's length.
Open the cover for cleaning the inner parts of the ADF or for
replacing consumables.
Button used to open the ADF
For the Pre imprinter option
The documents loaded onto the Hopper will be fed sheet by sheet
for scanning.
Pull the Hopper extension out for loading long documents.
Documents to be scanned are loaded onto the Hopper.
Sheet Guides used to make sure that the paper to be scanned is
fed into the scanner straight, avoiding skew.
Switch the scanner ON&OFF.
4 6
5
15
14
Function