Offset/Scan Scale - Fujitsu FI-5900C Operator's Manual
Image scanner
Hide thumbs
Also See for FI-5900C:
- Operator's manual (257 pages) ,
- Getting started (30 pages) ,
- Consumable replacement and cleaning instructions (24 pages)
Table of Contents
Advertisement
8.3 Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
ATTENTION
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page
2.
Select [Device Setting] from left side list in the window, and press
[Offset].
The factory default setting are appropriate, so normally there is no need to
make any adjustment.
170.
8.3 Offset/Scan scale
8
177
Advertisement
Table of Contents
