Fujitsu FI-5900C Operator's Manual page 167

Is the Pad or the Brake roller worn
out?
NO
Have you set the document thickness
on on the operator panel?
YES
If the problem canot be resolved with this flowchart, refer to "6.4
Before contacting a service partner."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
(*1) Refer to "7.2 Document Quality" on page 157.
(*2) Refer to "7.5 Multifeed Detection Conditions" on page
(*3) Refer to "2.6 Loading Documents on the Hopper" on page 17.
(*4) Refer to "4 DAILY CARE" on page 103
(*5) Refer to "5 REPLACEMENT OF CONSUMABLES" on page 119.
(*6) Refer to "2.9 Setting the Paper Thickness" on page 29.
continued from the previous page
YES
NO
Replace the worn out Pad or
Brake roller. (*5)
Set the document thickness
to a thicker value (*6)
162.
6.3 Troubleshooting
6
147