Device Settings - Fujitsu FI-5900C Operator's Manual

［Device settings 2］
Selecting each item displays detailed settings (parameters) in the lower part.
Item
Multifeed Select the method to detect Multifeed.
"Section 8.4" (Check either of overlapping or document
length, or both of document length and over-
lapping)
Multifeed detec- Multifeed can be detected by this setting,
tion when scan-
even if the manual feeding is set.
ning in manual
feeding mode
Explanation Selectable parameter
None/Check Overlapping
[Ultrasonic]/Check Length/
Check Overlapping and
Length.
Selectable length (to be
detected as length difference):
10, 15 or 20mm
Disable/Follow driver settings Disable
8.1 Scanner Settings
8
Default
Check
overlapping
173