Hole-Punching Prohibited Areas - Fujitsu FI-5900C Operator's Manual
Image scanner
Hide thumbs
Also See for FI-5900C:
- Operator's manual (257 pages) ,
- Getting started (30 pages) ,
- Consumable replacement and cleaning instructions (24 pages)
Table of Contents
Advertisement
7.4 Hole-punching Prohibited Areas
Punched holes in the shaded areas may cause errors.
For job separation sheet requirements, refer to
Reference Point
HINT
"7.7 Job Separation Sheet" on page
35
Front Side
Center line
If there are any holes in the 35mm wide central column, you can set the doc-
ument a bit to the left or right to avoid detecting error.
7.4 Hole-punching Prohibited Areas
165.
Unit : mm
Leading edge
Bottom edge
7
161
Advertisement
Table of Contents
