Device Settings - Fujitsu FI-5950 Operator's Manual

［Device settings 2］
Selecting each item displays detailed settings (parameters) in the right part of the dialog box.
Item
Multifeed Select the method to detect Multifeed.
"Section 8.4" (Check either of overlapping or document
length, or both of document length and over-
lapping)
Multifeed detec- Multifeed can be detected by this setting,
tion when scan-
even if the manual feeding is set.
ning in manual
feeding mode
"Section 8.5"
Page Edge Filler
Fill the end sections of a specified-mm-wide
(ADF) with white or black on the scanned image.
"Section 8.6" When the backing (background) color is
white, the end sections are filed with white;
and when the background color is black,
filled with black.
138 8.1 Scanner Settings
Explanation Selectable parameter
None/Check Overlapping
[Ultrasonic]/Check Length/
Check Overlapping and
Length.
Selectable length (to be
detected as length difference):
10, 15 or 20mm
Disable/Follow driver settings Disable
Top/left/right: 0 to 15mm
Bottom: -7 to 7mm (can be set
in increments of 1mm)
A
B
(A: Image area B: Filled area
A+B: Area to be output)
Default
Check
overlapping
Top/Bottom/
Left/Right:
0mm