Power Does Not Turn On; The Machine Does Not Start Printing; Troubleshooting - Ricoh L4160 Operation Manual

Troubleshooting

Take appropriate actions as described below before taking the trouble as a failure.
If still the problem is not solved after troubleshooting, contact your dealer or an office of RICOH.

Power does not turn on

In most cases, this is due to improper connection of the power cable for the machine or computer. Check that
the power cable is connected properly.
Has the power cable been connected
between the machine and a power plug
socket ?
Is the main switch ON ?
Is the power switch located on the front of
machine "ON" ?

The machine does not start printing

This occurs when the data is not being transmitted to the machine properly.
It can also occur when the printing function does not work properly or the media is not set correctly.
Is the correct interface cable used ?
Is the interface cable properly connected ?
Is the message on the display indicating
that ink has run out ?
5-2
Yes
No
Securely connect the power cable.
No
Turn on the main switch. (
No
Turn on the power switch on the front of the
machine.
No
Use the cable exclusive for the device.
No
Securely connect the interface cable.
Yes
Replace the ink cartridge with a new one.
P.2-3)