Ricoh L4160 Operation Manual page 111

8
Press the
• Until washing liquid is filled, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the Step 8 is completed and you close the right maintenance cover, press
the
carriage returns to the original position.
9
Fill up the cap with Cleaning Fluid for
maintenance．
• Suck Cleaning Fluid into a dropper and fill up the cap with it.
Fill up the cap with cleaning solution on the verge of
overflow from the cap.
10
Close the right maintenance cover then press the
key.
11
Press
to be left as it is.
• Set value : 1 to 99 minutes (Unit: minute)
12
Press the
• The Cleaning Fluid filled in the cap is absorbed.
• The screen on the right is displayed only for the duration set in the
step 10.
• It returns to the step2 after the duration.
• When nozzle missing is not cleared even after nozzle recovery (
out several times, contact the distributor in your region or our service office.
key.
key. If you press the
to set the time for the Cleaning Fluid
key.
When Nozzle Clogging Cannot Be Solved
F i l l
COMP L E T ED ( NEX T ) [ EN T ]
key before washing liquid is filled, the
NOZ Z L E WASHE
L E AV I NG T I ME
NOZ Z L E WASHE
L E AV I NG T I ME
P.4-22) or this washing is carried
t h e l i q u i d
: 1 m i n
: 2 m i n
P L E A SE WA I T
0 0 : 0 0
* * C L EAM I NG * *
P L E A SE WA I T
4-19
1
1
1
4