When Pictbridge Printing Does Not Work - Ricoh SP C261SFNw User Manual

2. Disconnect the USB cable from the machine.
Make sure to close the cover of the USB flash disk port after use.

When PictBridge Printing Does Not Work

This section explains likely causes and possible solutions for problems that can occur during PictBridge
printing.
Problem
PictBridge is not available.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
Cannot print.
Cause
There is a problem with the USB
connection or the PictBridge
settings.
You have connected multiple
digital cameras.
The specified number of prints
exceeds the maximum number
that can be printed at a time.
Direct Printing from a Digital Camera (PictBridge)
Solution
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
Connect one digital camera
only.
Do not connect multiple
cameras.
The maximum specifiable print
quantity at a time is 999.
Change the quantity to 999 or
less, and then retry printing.
95