Connecting Cables; Connecting Usb2.0 Interface Cable - Ricoh L4160 Operation Manual

Connecting Cables

Connecting USB2.0 Interface Cable

Connect the PC and this machine with the USB2.0
interface cable.
• Your RIP must be compatible with USB
2.0.
• When you connect USB cable, do not
touch the connector contact point with
your bare hand. Static may be generated
and it may break the PCB of this machine.
Notes on USB 2.0 Interface
• Your RIP must be compatible with USB 2.0.
When two or more Pro L4160/L4130 machines are connected to one personal computer
When two or more Pro L4160/L4130 machines are connected to one personal computer, the personal
computer may not recognize all the Pro L4160/L4130 machines normally.
Reconnect the unrecognized Pro L4160/L4130 machine to another USB port, if available, and check to see if it
is recognized.If the Pro L4160/L4130 machine is not recognized by the newly connected USB port, use USB
2.0 repeater cables available on the market.
Notes on peripheral devices in USB high speed mode
When a peripheral device (USB memory or USB HDD) to be operated in USB high speed mode is connected to
the same personal computer that a Pro L4160/L4130 machine is connected to, the USB device may not be
recognized.
When Pro L4160/L4130 is connected to the personal computer to which an external HDD is connected via
USB, the speed of data output to Pro L4160/L4130 may drop.That can cause the head unit to stop temporarily
at the right or left end during printing.
1-10
USB cable
USB 2.0 repeater cable