Ricoh L4160 Operation Manual page 151

Message
E R ROR 6 2 7
R E - I N S E R T C A R T R I DG E
E R ROR 7 0 2
T H E RM I S T OR CON N E C T
E R ROR 7 0 3
! E X T H E A T E R B R K
E R ROR 7 0 7
! H 1 H E A T E R B R E A K
E R ROR 7 1 0
H E A T E R T EMP E R ROR
E R ROR 9 0 1
I N V A L I D O P E R A T I ON
E R ROR 9 0 2
D A T A R EMA I N
E R ROR 9 0 d
NO H E A D S E L E C T
E R ROR 9 0 f
P R I N T A R E A S HOR T
E R ROR 0 4
P A R AM ROM
SYSTEM HALT
Message
S Y S T EM H A L T
0 0 0 : ME S S A G E
Cause
There is a slot in which the Eco-car-
tridge has not been inserted more
than a certain time.
The thermistor connection of a
heater is defective.
The thermistor is abnormal and the
temperature cannot be read nor-
mally.
A head heater is disconnected.
The temperature abnormality of the
heater has been detected.
When this error occurred and if the
temperature abnormality cannot be
resolved, the power supply of the
machine is forcibly turned off.
Due to a certain error, the function
cannot be performed.
There remains received data that
has not yet been printed.
The number of mounted heads is
"0".
The media width or the media
length required for printing is not
enough.
The parameter has an error.
Turn off the main power to the machine and turn it on after a while.
If the same error message appears again, check the number and contact your
local distributor to call for service.
Warning / Error Messages
Solution
Set an Eco-cartridge.
Check the thermistor connection of the
drying heater.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Return to the local screen, check the
error status and take a countermea-
sure.
Execute the data clear function.
( P.2-29)
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Change the media to the one with
enough width or length.
When the media width narrows
because the origin moved, slide the
origin to the right to widen the effective
media width.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Solution
("000" is the error No.)
1
1
1
1
5
5-17