Washing The Ink Discharge Passage (Disway Wash) - Ricoh L4160 Operation Manual

11
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in Cleaning Fluid for
maintenance. (Wipe off so that you can see blue color of the
cap rubber.) Wipe off so that Cleaning Fluid for maintenance
will not remain.
Before cleaning
12
Press the
13
Close the right maintenance cover then press the
key.
• After its initial operation, the machine returns to step1.
Performing the station maintenance without
You can select station maintenance by using the
Press the
key in Local.

Washing the Ink Discharge Passage (DISWAY WASH)

Wash the ink discharge passage regularly(about once a week) to prevent the head nozzles from clogging due
to ink coagulation inside the passage.
1
Press the
2
Press
4-8
After cleaning
key after the cleaning.
Press to
select [MAINTENANCE].
key in LOCAL.
MAINT.
to select [DISWAY WASH].
Cap rubber
C l o s e c o v e r
COMP L E T ED
key
MAINT.
key in the Local without pressing the
Press the key twice.
• It becomes the same condition as the
key is pressed from Local.
MAINT.
CARR I AGE OU T
D I SWA Y WASH
Cap rubber cover
[ EN T ]
key.
MAINT.
[ EN T ]
[ EN T ]