System Features Descriptions - Samsung iDCS 500 General Description Manual

4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account code key without interrupting a
conversation. Single line telephone users must temporarily interrupt the call by
hook-flashing and dialing the feature access code. Manually entered account codes
can be up to 12 digits long. In some cases users can be forced to enter an account
code and this account code may or may not be verified as described below.
FORCED – VERIFIED
When set for this option the user must enter an account code for all outgoing calls.
The account code entered will be verified from a system list of 500 entries for M
version software and from a list of 999 entries for L version software. Forced Veri-
fied codes can contain the digits 0~9.
FORCED - NOT VERIFIED
When set for this option the user must enter an account code for all outgoing calls,
but the account code is not verified against the system list. Non verified account
codes can contain the digits 0~9, * and #.
VOLUNTARY
In this case account codes are not required to make outgoing calls but may be
used if desired. This is also the method used to assign an account code to incom-
ing calls. These account codes can contain the digits 0~9, * and #.
ACCOUNT CODE KEY (M VERSION)
The account code (ACCT) key can be programmed on any keyset and will appear
as a soft key on display keysets. This key allows the user to enter account codes
without interrupting a call.
ACCOUNT CODE KEY – ONE TOUCH (L VERSION)
The account code (ACC) key can be programmed on any keyset. This key can be
programmed with an extender and operates in three different ways depending on
the extender as follows.
Extender = 000
key will operate in the same manner as the ACCT key in the M version. That is to
say the user will be prompted to enter an account code when the key is pressed.
Extender = 001~999
to 999 the key will, when pressed, automatically insert the account code contained
in that bin of the system account code list. This is known as One Touch account
When programmed with an extender of 000 the ACC
When programmed with an extender ranging from 001
4.2