Telephone Company Interfaces - Samsung iDCS 500 General Description Manual

The iDCS 500 may be configured as a key system or a hybrid system. Depending on the
method of operation, the appropriate FCC number must be given to the telephone com-
pany. Certain features such as pooled access by button or dial access, LCR, off premise
extensions and tie lines may require the hybrid registration. Check with the local tele-
phone company providing the service if you are in doubt. It is the customer's responsibil-
ity to comply with local telephone company tariffs.
TELEPHONE CONNECTION REQUIREMENTS
The Federal Communications Commission (FCC) has established rules which permit the
DCS to be connected directly to the telephone network using telephone company net-
work access jacks usually referred to as "Registered Jacks."
5.3

TELEPHONE COMPANY INTERFACES

CIRCUIT TYPE
LOOP START LINE
GROUND START
LINE
DID LINE
E & M TIE LINE
OFF PREMISES
EXTENSION
E911
DCS
CARD TYPE INTERFACE CODE
TRK-B
TRK-B1
TRK-C1
T1
T1
GTRK
T1
DID
T1
E & M
SLI-4 circuit
board only
E911
5.2
FACILITY
O2LS2
04DU9-DN
04DU9-BN
02GS2
04DU9-BN
02RV2-T
04DU9-BN
TL11M
OL13C
02RV2-O
NETWORK JACK
RJ21X
RJ11C
RJ14C
RJ48C
RJ48C
RJ21X
RJ11C
RJ14C
RJ48C
RJ21X
RJ11C
RJ14C
RJ48C
RJ2EX
RJ21X
RJ11C
RJ14C