Samsung iDCS 500 General Description Manual page 67

BUSY STATION INDICATIONS (BLF)
DSS/BLF keys may be assigned to any keyset or add-on module. These buttons
will be off when the station is idle, light red when that station is in use and flash
distinctively when that station is in the DND mode.
CALL FORWARDING
Station users can forward internal and outside calls to other destinations immedi-
ately (Forward All), when busy (Forward Busy) or if not answered in a program-
mable number of seconds (Forward No Answer). These forward destinations can
all be different. Once a destination has been programmed, it can be turned on and
off with a programmable key. Forward All takes priority over Busy and No Answer
conditions.
In addition to the three usual methods of forwarding described above, a fourth
option called Follow Me is available. This option allows a station user to set a For-
ward All condition from his/her station to another station while at the remote station.
To display the Follow Me condition, the TRSF key lights steady red at the station
that is forwarded. The TRSF key also lights if Forward All is set and no key is pro-
grammed for Forward All.
Keyset users can be given an external call forward button to forward their calls to
an external phone number. Each outside line may be programmed to either follow
or ignore station call forwarding. A per-station option controls whether internal calls
forward to voice mail or not. Single line telephones must have the system adminis-
trator program this feature for them.
CALL LOGS
With the call log feature, a display keyset user can review up to 50 of the last incom-
ing calls from the Caller ID review list or up to 50 of the last external telephone
numbers that were dialed. The numbers can be viewed, stored and/or dialed us-
ing the associated soft keys. LCR must be enabled for dialing and storing num-
bers from the CID review list. Optional hardware and/or software may be needed
for Caller ID.
NOTE: Call Logs are only available with a LAN module installed on the MCP card.
CALL PICKUP
With directed call pickup, a user can answer calls ringing at any station by dialing
a code plus that extension number. The group pickup feature allows the user to
answer any call ringing within a pickup group. Pickup keys may be customized
with extenders to allow pickup from a specific station or pickup group. The iDCS
500-M version software has 20 programmable pickup groups and the iDCS 500-L
version software has 99 programmable pickup groups.
4.33