Keyset Led Indications - Samsung iDCS 500 General Description Manual

Transfer/Conference Tone—Indicates your call is being held and you can dial another party.
TRANSFER/CONF TONE—100 ms ON/100 ms OFF
Confirmation Tone—Very short beeps followed by dial tone indicate you have correctly set or canceled a
system feature.
CONFIRMATION TONE—50 ms ON/50 ms OFF
ERROR TONE—A distinctive two level beeping tone indicates you have done something incorrectly. Try
again.
ERROR TONE—50 ms of tone 1/50 ms of tone 2
3.6

KEYSET LED INDICATIONS

CONDITION
LINE IDLE
LINE IN USE
RECALL
CALL ON HOLD
RINGING C.O. CALL
RINGING INTERNAL CALL
DND INDICATION
OPERATOR CALLS
(
ANS/RLS (DND)* **
ANS/RLS (HDSET MODE)**
TRSF (FORWARD ALL)**
*Overrides headset mode
**DCS model keysets only
LED COLOR
OFF
RED/GREEN
AMBER
RED/GREEN
GREEN
GREEN
RED
RED
)
RED
RED
RED
CONTINUOUS
FOR TWO SECONDS
FOR TWO SECONDS
LED ON
–
STEADY
500 ms
500 ms
100 ms
100 ms
112 IPM for 500 ms
100 ms
112 IPM for 500 ms
STEADY
STEADY
3.4
LED OFF
OFF
–
500 ms
500 ms
100 ms
100 ms
500 ms
100 ms
500 ms
–
–