Interface Ports - Unitech HT630 User Manual

Cradle
There are two ways to charge the main battery via the HT630 charging/communication cradle or a quick
charging /communication cable.
Cradle LED Icons
The icon indicates communication. When HT630 is transmitting data with the host computer,
LED will flash, showing that the data is transmitting.
The icon indicates the charging of the main unit. When the main battery is in charge on the
cradle, LED will be shown red; when fully charged, the light will turn to green.
This LED light shows the power status of the cradle itself. When the light is on, it is indicated
the cradle is powered on.
Power On
After charging completely, LED is turned to green and then, you are now ready to turn on the unit.
Press the power button ( ○l ) on the keypad to turn on HT630!

1. 6 Interface Ports

The HT630 does its' communication via RS232 communication port located in the back of the unit. You can
connect the unit via the communication cable to PC RS232 jack for data transfer or connect through cradle for
communication.
Communication with the Host
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
.
) )
Bluetooth Connection
)
)
RS232 Connection through cable
RS232/Modem/Ethernet Communication
5