Unitech HT630 User Manual page 22

Hide thumbs Also See for HT630:

Table of Contents

HT630 can be configured to the standard Bluetooth HID as data output interface, which can allow the terminal

to transmit and receive data via Bluetooth enabled devices.

Follow the procedures below to establish a Bluetooth connection on the host.

Note: Make sure you power on the HT630 and enable Bluetooth function. (Please refer to Chapter 1.5 Quick

Start and Chapter 3.3.5 BLUETOOTH)

1. If your host has a built in Bluetooth function, enable the Bluetooth function.

If your host does not have the built in Bluetooth function, please attach an external Bluetooth dongle at

your host and install the driver.

2. Double-click the Bluetooth icon on the taskbar.

(As different user might use different brand of Bluetooth dongle, please find this according to your

dongle's manual)

3. Click "View devices in rages" at My Bluetooth Places folder.

Bluetooth Application

Chapter 5

Table of Contents

Show Quick Links

Table of Contents