Security
The wireless network interface supports data encryption (WEP, 64 or 128 bits) and WPA-PSK/WPA2-PSK
encryption.
Network Authentication
Select an authentication scheme of Open System, WPA-PSK or WPA2-PSK from the pull-down menu.
WPA Pre-Shared Key
When WPA-PSK or WPA2-PSK is enabled. You should fill the WPA Pre-Shared Key in the textbox.
WEP Key Index
Selects the Primary WEP Key for your wireless network.
WEP Key 1/2/3/4
For each of the four WEP Keys, enter the appropriate WEP Key. The WEP Keys are used to help prevent
data from being stolen as it is transmitted over public networks. The WEP Key setting(s) for the HT630 must
be the same as the WEP Key settings for the AP.
Note: Please reboot HT630 after completed setting.
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
29