Unitech HT630 User Manual page 26

Hide thumbs Also See for HT630:

Table of Contents

Installation Procedures:

Step 1: One should prepare an access point and change its SSID to wlandemo.

Step 2: Once HT630 attached to Access Point, one may use Monitor.exe to Find HT630 & its IP address,

even ones PC and HT630 are in different subnet.

Note: One may click re-scan button to find all the HT630 in the subnet (Figure 3).

Step 3: Configure HT630 by monitor

1. Change HT630's IP address

(1) Click "Configuration".

(2) Select "Network" -> it will pop-up Network setting page (Figure 4).

(3) One may change the IP address/subnet mask/Gateway to meet one's subnet.

WiFi settings

Figure 3 re-scan function

Chapter 6

Table of Contents

Show Quick Links

Table of Contents