Unitech HT630 User Manual page 32

Hide thumbs Also See for HT630:

Table of Contents

Wireless Setup

Radio Settings

In "Radio Setting" page, You may choose from two different WLAN modes—Infrastructure Mode and Ad-hoc

Mode—which are illustrated in the following diagrams.

SSID

Enter the name of the wireless network (SSID) that the HT630 is connected to.

Infrastructure Mode

In the following example, the HT630 communicates with the host computer via the AP. The host computer

connects to the AP via an Ethernet connection, allowing serial data to be transmitted back and forth between

the serial devices and host computer.

Ad-hoc Mode

In the following example, two HT630 devices establish an Ad-hoc peer-to-peer relationship, which means that

they communicate with each other directly, without going through an AP (Access Point).

Channel

Select a radio channel for the wireless network from the pull-down menu. In infrastructure mode, the AP will

specify the channel automatically. In Ad-hoc mode, the user must use the pull-down menu to specify the

channel.

Table of Contents

Show Quick Links

Table of Contents