Calibrating Using The Keyboard - Symbol VRC 89XX Product Reference Manual

5. Select the Calibration tab and tap the Recalibrate
calibration screen displays.
6. As the screen instructs, carefully press and briefly hold the stylus on the center of
each target that appears on the screen. Repeat as the target moves around the
screen.
7. Tap the screen to accept the new calibration.
Note: If the digitizer fails to respond, call the Symbol Support Center for
assistance.

Calibrating Using the Keyboard

If the present calibration does not allow you to use the touch screen, use the keyboard to
calibrate:
1. Press Ctrl + Esc keys to access the Start menu.
2. Using the arrow keys, select Settings, then Control Panel.
Carefully press and briefly hold stylus on the center of the target.
Repeat as the target moves around the screen.
Figure 4-8. Calibration Screen
Operating the Terminal
button. The
4-11