Table of Contents
Advertisement
IP ConfigTab
The IP Config tab allows you to adjust IP configuration settings.
•
Select Dynamic Host Configuration Protocol (DHCP) from the IP Type drop-down
list to obtain a leased IP address and network configuration information from a
remote server. DHCP is the default setting for the terminal profile. When DHCP is
selected, the IP address fields are read-only.
•
Select Static to manually assign the IP, subnet mask, default gateway, DNS and
WINS addresses used by the terminal profile.
•
IP Address: Enter an IP (Internet Protocol) address in dotted-decimal notation
(e.g., 192.168.7.27) that the server uses to transmit and receive data.
•
Subnet Mask: Required in order for the subnet to exist. Its purpose is to mask
out IP addresses that are not part of the subnet. The network administrator
usually has the required subnet mask.
•
Default Gateway: Used to connect to the corporate network. The network
administrator usually has the IP address required for the default gateway.
•
DNS (Domain Name System): The IP address of a server containing a
database of host names and their associated IP addresses so that when a host
name is used, it can be resolved into its IP address.
•
WINS (Windows Internet Name Service): A NetBIOS Name Server that
registers your NetBIOS names and resolves into IP addresses, similar to DNS.
DHCP
Figure 5-7. IP Config Tab
Spectrum24 Network Configuration
Static
5-7
Advertisement
Table of Contents
Troubleshooting
