Locking The Desktop; Calibrating The Screen; Calibrating Using The Display - Symbol VRC 89XX Product Reference Manual

Locking the Desktop

You can lock the desktop of the VRC 89XX to hide icons that contain configuration
information such as terminal and network settings. When you lock the desktop, only the
working applications display.
If you don't have the optional keyboard, use the virtual keyboard on the VRC 89XX to
perform the following key sequences.
• Press the Func + "S" keys to display the password screen. Enter a password and
tap OK. The terminal displays only the working applications.
• Press the Func + "S" keys again to display the password screen. Enter your
password again and all icons display on the screen.

Calibrating the Screen

Calibrating Using the Display

This section describes how to calibrate your terminal so the cursor on the touch screen
aligns with the tip of your stylus. If the current calibration does not allow for easy touch
screen input or you want to recalibrate the screen at any time, refer to
Keyboard on page 4-11.
To calibrate your terminal:
1. If you are using the default registry, go to step 5. Otherwise, proceed with step 2.
2. Tap the Start menu.
Operating the Terminal
Calibrating Using the
4-9