VRC 89XX Radio Terminal Product Reference Guide for Embedded Windows
PowerTab
The IP Config tab allows you to set the Radio Transmission Power level and the Power
Saving Modes for the terminal profile.
Infrastructure Mode
Adjusting the Radio Transmission Power level enables you to expand or confine the
transmission area with respect to other wireless devices that could be operating nearby.
Reducing a coverage area in high traffic areas improves transmission quality by reducing
the number of noises in that coverage area.
•
In Infrastructure mode there are two transmission power options:
•
Select Automatic to use the AP power level. Automatic is the default mode for
terminals operating in Infrastructure mode.
•
Select Power Plus to set the terminal transmission power one level higher than
the level set for the AP.
•
In Ad Hoc mode there are five transmission power options:
•
Select Maximum power to set the terminal to the highest transmission power
level. Select Maximum power when operating in highly reflective environments
and areas where other devices could be operating nearby. Additionally, use the
maximum power level when attempting to communicate with devices at the
outer edge of a coverage area.
•
Select 50%, 25% or 10% to set the transmit power level to that percentage of
the maximum power level.
•
Select Minimum power to set the terminal to the lowest transmission power
level. Use the minimum power level when communicating with other devices in
5-8
Figure 5-8. Power Tab
Ad Hoc Mode
®
CE .NET