VRC 89XX Radio Terminal Product Reference Guide for Embedded Windows
Note: The terminal and bracket must be firmly secured to a surface that
can support the terminal's weight.
Table 2-1 on page 2-4
Installing Your Terminal
Follow the instructions below to properly install your terminal in a vehicle.
Positioning the Terminal
•
Determine the best position for the terminal and all the associated components. If
a similar terminal was previously installed, check to see if the position it used is
suitable for the VRC 89XX.
•
Test the installation for at least 30 minutes before installing on another vehicle.
Record all details:
•
Check that the positions of the terminal and filter box do not obstruct vehicle
controls.
•
Check that the terminal does not obstruct the driver's view.
•
Check the position of the terminal for user comfort over long periods.
•
Ensure the filter box is not fitted in a confined space where it may overheat.
Important Fixing Information
Any modification to supplied mountings could cause early failure of the unit/mountings.
•
A minimum of four fixing positions must be used.
•
All nuts/bolts/end clamps to be checked periodically and tightened if required.
•
When installing the unit, care must be taken to ensure that the mounting bracket
footprint is fully supported.
•
Additional plates may be required to achieve this.
2-2
lists the parts in the installation kit included with your terminal.
®
CE .NET