Providing Power To The Terminal - Symbol VRC 89XX Product Reference Manual

Providing Power to the Terminal

A Lead Acid battery can leak Hydrogen gas. A spark any-
where near the battery can cause it to explode. Always
make your final connection to power as far away from the
battery as possible. For example, connect the power cable
to the battery first, then connect it to the terminal.
Follow the instructions below to connect power to the terminal using the filter box.
2
3
Refer to
connections.
Filter Box
1
2 and 4-pin
amphenol
4
connectors
viewed
externally on
1
filter box.
2
Table 2-2 for filter box
Figure 2-3. Connecting Power to Your Terminal
W
ARNING
VRC 89XX Series
VRC7900 Series
Note:
NOTE: -
See the rear label for
See the rear label for
-
voltage input limitations.
voltage input limitations.
Pins 1 & 3 are
-
Pins 1 & 3 are connected
connected internally
internally within the
within the supplied
supplied cable (Item 1).
cable (Item 1).
1
3
2
Refer to
power connections.
Installing the Terminal
3-pin XLR plug
viewed
externally on
VRC 89XX
VRC7900
Table 2-3 for terminal
2-7