Download
Share
Print this page
Symbol VRC 5000 Quick Reference Manual
  1. Manuals
  2. Brands
  3. Symbol Manuals
  4. Touch terminals
  5. VRC 5000
  6. Quick reference manual

Symbol VRC 5000 Quick Reference Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
V
R
C
5
0
0
0

Advertisement

loading

Related Manuals for Symbol VRC 5000

Summary of Contents for Symbol VRC 5000

  • Page 2 Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
  • Page 3 The VRC 5000 is a rugged, NEMA 4/IP66, PC-compatible computer. The VRC 5000 is available with or without a touchscreen, and a heater. The VRC 5000 provides a full VGA display (either electroluminescent or color LCD), multiple network options and full I/O capability. Each VRC system is fully PC- compatible with the MS-DOS Versions 3.3 through 6.22,...

  • Page 4: Table Of Contents

    V R C 5 0 0 0 About this Guide This guide provides information on the operation of the VRC 5000 and the VRC 5040. For information on installation, refer to the VRC 4000 Series Installation Guide (p/n 70-32536-xx). For more detailed information on any of the following topics, refer to the VRC 4000/5000 Product Reference Guide (p/n 70-19725-xx).

  • Page 5: Parts Of The Vrc 5000

    Q u i c k R e f e r e n c e Parts of the VRC 5000 Front Panel The VRC front panel consists of a gasketed resistive touchscreen mounted over a flat-panel video display. The VRC can be operated by touching the screen to activate functions and initiate actions.

  • Page 6: Accessories

    V R C 5 0 0 0 Accessories VRC 5000 The VRC 5000 computer is supplied with: • Wall-mounted 110VAC power supply • Bracket (optional, required for vehicle-mounting) • Antenna (required for wireless configurations) • This Quick Reference Guide •...

  • Page 7: Basic Operation

    Before powering up the VRC for the first time, be sure the terminal is securely mounted, and that all cable and peripheral connections are securely attached. Caution: In freezer applications, do not start the VRC 5000 with color display in the cold environment. This can damage the fluorescent bulbs.
  • Page 8 Product Reference Guide for more information. Booting the VRC 5000 If the VRC 5000 locks up during normal operation, it can be reset by performing a warm or cold boot. The type of boot depends on the desired state of the VRC system.

  • Page 9: Touch-Based Applications

    Q u i c k R e f e r e n c e Touch-Based Applications The VRC 5000 is available in both touchscreen and standard (non- touchscreen) models. For touch-based applications, the video screen displays graphical icons whose corresponding functions are activated when touched by a user.

  • Page 10: Troubleshooting

    1. Check the unit for any signs of exterior damage. 2. Check and reseat all rear panel cable connections. 3. Be sure the VRC is receiving operating power: VRC 5000 Check the circuit breakers feeding the 110VAC wall outlet supplying power to the VRC.
  • Page 11 (no dial package used with the modem card. Check the tone). telephone line connections. VRC 5000 does not Check for cable breaks, shorts and bad crimps us- communicate with ing a cable scanner. Check for electrical interfer- the network.
  • Page 12 It shall not apply to any product (i) which has been repaired or altered unless done or approved by Symbol, (ii) which has not been maintained in accordance with any operating or handling instructions supplied by Symbol, (iii) which has been...
  • Page 13 Customer will pay for the replacement product in case it does not return the replaced product to Symbol within 3 days of receipt of the replacement product. The process for return and customer’s charges will be in accordance with Symbol’s Exchange Policy in effect at the time of the exchange.
  • Page 14 V R C 5 0 0 0 • Reduce or eliminate excessive force • Keep objects that are used frequently within easy reach • Perform tasks at correct heights • Reduce or eliminate vibration • Reduce or eliminate direct pressure •...
  • Page 15 The majority of Symbol’s RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the user’s authority to operate the equipment.
  • Page 16 70-37798-01 Revision B — August 1999 Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300...