Note: The Microlise website is password protected. Use the Windows
CE .NET license key information, as it appears on the Microsoft
.NET license label on your terminal, to gain access to the website.
1. Connect the ActiveSync cable to the COM1 port on the terminal and an available
COM port on the PC.
2. Power on the unit while holding down the P1 and P3 keys. The following menu
appears:
- Up
- Down
P1 -
P2 - Select
P3 -
3. Press the Brightness "-" (minus) button on the switch panel to highlight 3 - Service
Menu.
VRC8900 BootLoader
Boot Ver X.X.XXX
Boot Menu: -
1 - Hard Boot
2 - Use Default Registry
3 - Service Menu
Key
Figure 6-1. Menu
Brightness "-" Button
Figure 6-2. Brightness Button
Configuring the Terminal
6-3