Aps Tab - Symbol VRC 89XX Product Reference Manual

VRC 89XX Radio Terminal Product Reference Guide for Embedded Windows
2. Select the size of packets sent from the Size drop-down list.
3. Tap Start Test to begin the continuous ping test. Tap Stop Test to terminate the
ping test.
• The average mega-bits per second, signal strength, data rate currently in use,
test statistics and round trip times are displayed for each test.
• The associated access point's MAC address is also displayed.
• The signal strength level and the data transmission rate are displayed in real-
time bar graphs.

APs Tab

Use the APs tab to view access points with the same ESSID as the adapter. View the AP
MAC address, signal level and channel of known access points.
Note: The APs tab is only available in Infrastructure mode (selected on the
Mode tab).
• The currently associated access point's icon includes a radio wave radiating from
the antennae to indicate the associate status. Tap on an icon to display a menu:
• Select Set Mandatory to prohibit the adapter from associating with a different
access point. The letter "m" displays on top of the access point's icon when this
option is selected.
• Select Set Roaming to allow the adapter to roam to any access point with a
better signal quality.
These settings are temporary and are not saved to the registry.
5-12
Figure 5-13. APs Tab
®
CE .NET