Intellian i2 Installation And Operation Manual page 37

Setting the DiSEqC Method
DiSEqC selection can be made from ACU. It is not recommended for a
novice satellite service user this mode.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X5
USE DISEQC ?
PREV YES NEXT
DO NOT USE DISEQC
PREV NEXT
1. Press YES to enter setup mode.
2. Press NEXT five times to enter DISEQC mode.
3. Press YES to use DISEQC.
4. Select the DiSEqC Method*
PREV - Shows previous DiSEqC Method.
SELECT/ENTER - Set the displayed DiSEqC
method.
NEXT - Shows next DiSEqC Method.
Press ENTER to move to next screen.
SAVE ?
YES NO
DiSEqC Method*
DO NOT USE DISEQC - DiSEqC is not being used.
USE TO CHANGE BAND - DiSEqC is being used to change to low and high band.
USE TO CHANGE SAT - DiSEqC is being used to change tracking satellite.
5. Press YES to accept the selection.
Press NO to cancel and return to main setup
mode.
37