Intellian i2 Installation And Operation Manual page 33

Setting the Antenna Parameters
It is not recommended for a novice satellite service user to use this
mode. Consult Intellian for changing antenna parameters.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X3
SET ANT PARAMETER ?
PREV YES NEXT
PARAM: SCAN OFFSET
PREV YES NEXT
1. Press YES to enter setup mode.
2. Press NEXT three times to enter set antenna
parameter mode.
3. Press YES to set antenna parameter.
4. Select the PARAM*.
PREV - Shows previous parameter.
SELECT - Set the displayed parameter.
NEXT - Shows next parameter.
Press ENTER to move to next screen.
5. Input the WRS LEVEL.
WRS LEVEL : 0500
- INPUT +
6. Press YES to set up another parameter.
ANOTHER PARAMETER
YES NO
7. Press YES to save the input information.
SAVE ?
YES NO
+ increases the value. - decreases the value.
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
Press NO to cancel and return to main setup
mode.
Press NO to cancel and return to main setup
mode.
33