Intellian i2 Installation And Operation Manual page 30

Intellian Satellite TV Antenna Systems
Edit Satellite Information
It is possible to modify the existing satellite information and input new
satellite information into the ACU as well. It is not recommended for a
novice satellite service user to use this mode.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X2
EDIT SAT INFO ?
PREV YES NEXT
SAT NAME : DTV101
PREV SELECT NEXT
30
1. Press YES to enter setup mode.
2. Press NEXT twice to enter edit satellite info
mode.
3. Press YES to edit satellite info.
4. Set the satellite name.
PREV - Shows previous satellite name.
SELECT - Select the displayed satellite for
editing.
NEXT - Shows next satellite name.
Press ENTER to move to next screen.
5. Input the satellite name.
SAT NAME : DTV101
+ increases the value. - decreases the value.
- INPUT +
Change the underscored digit using the +/- but
tons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
6. Press ENTER to move to next screen.
SAT NAME : DTV101
Press BACK to return previous screen.
- INPUT +
7. Input the satellite position.
LONGITUDE 124.00 E
+ increases the value. - decreases the value.
- INPUT +
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
8. Input the tracking frequency (MHz) and symbol
VER LOW 12598 21096
rate (KHz) for vertical low band.
INPUT +
-