Bypass Feed (Including Special Paper) - Toshiba e-STUDIO 12 Operator's Manual

REDUCTION/ENLARGEMENT/ZOOM
To select a preset copy ratio:
Preset reduction and enlargement ratios
are: 50%, 70%, 81%, 141%, and 200%
(50%, 64%, 78%, 129%, and 200%)
2
Set the number of copies using the copy quantity (
(

BYPASS FEED (including special paper)

The bypass tray automatically feeds up to 50 sheets of standard copy paper and also feeds
special papers such as transparency film and labels one sheet at a time. Copy paper measuring
from A6 to A4 (3-1/2" x 5-1/2" to 8-1/2" x 14") and in the weight range of 52 to 130 g/m
34.5 lbs.) can be used in this tray. (For paper weighing from 52 to 130 g/m
(8-1/2" x 11") is the maximum size.)
Place the original face down on the original table. Align it with the original scale and
close the original cover.
Open the bypass tray and extend the tray.
16
To decrease or increase the zoom ratio rapidly, press and hold down the
or key. However, the value will stop at the preset reduction or enlargement
ratios. To move beyond these ratios, release the key and then press and hold
it down again.
) key.
The original image must be smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this may cause smudges
on the edges of the copies.
To select a zoom ratio:
When a zoom ( or
the ZOOM ( ) indicator will light up
and the zoom ratio will be displayed in
the display.
, ) keys and press the print
) key is pressed,
2
(14 to
2
(28 to 34.5 lbs.), A4