Setting The Conversion List For Vcard Transfer - Siemens HiPath 4000 User Manual

Step by Step
u v
Ï
Settings
s t
Telephony
s t
Area Codes
Out of Charger:
s
Move the cursor down one line.
u v
Activating or deactivating.
Save setting.
Save
Setting the conversion list for vCard
transfer
Note:
Can be set only when the menu item is visible.
To change see
Phone numbers are usually specified as follows in e-
mail programs, such as, Microsoft Outlook: +49 (05251)
820776. The handset however cannot use this format to
dial the number. If the number above is a local landline
number, it is then changed as followed when dialed
e. g. 0820776. The conversion pairs are defined in the
conversion table and can be modified if they deviate
from the default values.
Consult your system administrator about the conver-
sion rules that apply to your handset.
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The conversion ta-
ble is displayed.
o
Change entry.
Press the up/down navigation key to navigate to another
input field; Press the left/right navigation key to move
the cursor within an input field.
Save setting.
Save
a Press the on-hook key several times to end the opera-
tion.
Setting up the handset
Page 34.
33