Telephone Blocking; Handset Telephone Lock - Siemens HiPath 4000 User Manual

Telephone blocking

Step by Step
u v
Ï
Settings
s t
Audio Settings
s t
System
s t
Handset PIN
110
Telephone blocking

Handset telephone lock

Note:
Can be set only when the menu item is visible.
To change see
You can protect your handset against unauthorized ac-
cess by entering a 4-digit numerical code to lock it.
The PIN is preset to "0000" (default). The handset does
not prompt for a PIN in this setting. As soon as you have
changed the PIN you will need to enter it when you turn
on the handset.
Enter the value "0000" again to deactivate the PIN.
Attention:
If you have forgotten your PIN, please contact
Siemens Service. The PIN will be reset at your
own expense.
Entering a new PIN
v
Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the old PIN. If a PIN has not yet been set, then en-
ter "0000".
o
Enter the new PIN.
s Move the cursor down one line.
o
Repeat the new PIN.
[
Confirm your entries.
a Press the on-hook key several times to end the opera-
tion.
Page 34.