Locking The Telephone Line To Prevent Misuse - Siemens HiPath 4000 User Manual

Step by Step
> <
BASIC SERVICE
> <
PIN / COS?
> <
CHANGE COS
Battery charging when PIN lock active
If the handset has deactivated because the batteries
are flat, it automatically activates when you place it in
the charging shell. The charging operation starts. If you
have already set a PIN, you must enter it so that the
handset can receive calls.
Locking the telephone line to prevent
misuse
You can prevent unauthorized persons from using your
telephone (and the system directory) during your ab-
sence.
Prerequisite: You have been assigned a personal iden-
tification number (PIN) by System Support.
Note:
As an alternative, however, you can lock your
handset against misuse
Neither of these two locks may be active if you
want to place a call.
The PINs for locking the telephone line and for the
handset are not identical.
Locking the telephone line to prevent unauthorized
dialing
u
Call the system menu.
[
Select and confirm the basic setting.
either:
L M
Enter the service code.
Or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
then:
o
Enter the PIN (code no.).
Telephone blocking
Page 110.
111