Send An Entry Or Phonebook To A Handset Or System - Siemens HiPath 4000 User Manual

Step by Step
s t
Copy All
s t
Copy Entry
Send an entry or phonebook to a handset or
system
You can send individual entries or the entire phonebook
to other handsets or to the communications system.
To transfer the phonebook in vCard format via Bluetooth
see Page 105.
If your handset and the recipient's handset have phone
numbers between 1 and 99, you can send or receive a
list or entry directly from one handset to the other. If the
handsets' phone numbers start at 100, you must first
send the list or entry to the communication system. The
recipient can then use his or her handset to download
the list or entry from the communication system.
Restrictions when copying over the communica-
tion system
The entries in the handset's phonebook are stored in
vCard format
however, uses another format. This can cause loss of
phonebook entry information. The features that are new
for the vCard format are indicated by an asterisk (= new
for vCard format) in the table on
numbers are not affected.
Sending a list/entry
s
Open the phonebook.
s t
Select the required entry.
Press the display key.
Options
either:
[
Select the menu item and confirm.
Or:
[
Select the menu item and confirm.
then:
o
Enter a phone no. The following phone numbers are
possible:
• 1... 98 – the list or entry is sent directly to the recip-
ient's handset.
• 00 – the list or entry is sent to the communication
system and can then can be downloaded by any
handset.
Making calls – enhanced functions
Page 54. The communication system,
Page 54. The phone
59