Set Length Range For Ucc/Ean-128 - Newland NLS-HR1550-3E User Manual

**【Enter Setup】

Set Length Range for UCC/EAN-128

The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Both lengths can range from 1 to 255 characters. If minimum length is set to be greater than maximum length, the
scanner only decodes UCC/EAN-128 barcodes with either the minimum or maximum length. If minimum length is same
as maximum length, only UCC/EAN-128 barcodes with that length are to be decoded. The default minimum and
maximum lengths are 1 character and 255 characters respectively.
【Set the Minimum Length】
【Set the Maximum Length】
Example: Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12 characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the "Digit Barcodes" section in Chapter 7)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Chapter 7)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes "1" and "2".
7. Scan the Save barcode.
8. Scan the Exit Setup barcode.
【Exit Setup】
65