Set Length Range For Ucc/Ean-128 - Newland NLS-HR3260 Series User Manual

Set Length Range for UCC/EAN-128

The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
【Set the Minimum Length (Default: 1)】
83
If minimum length is set to be greater than maximum length, the scanner only decodes
UCC/EAN-128 barcodes with either the minimum or maximum length. If minimum
length is same as maximum length, only UCC/EAN-128 barcodes with that length are
to be decoded.
Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12
characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the Digit Barcodes in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode "1".
7. Scan the numeric barcode "2".
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.
【Set the Maximum Length (Default: 127)】
【Enter Setup】
**【Exit Setup】