Ucc/Ean-128 (Gs1-128); Enable/Disable Ucc/Ean-128; Set Length Range For Ucc/Ean-128 - Newland NLS-HR20-RF User Manual

UCC/EAN-128 (GS1-128)

Enable/Disable UCC/EAN-128

When disabled, UCC/EAN-128 is identified as Code 128.
** Enable UCC/EAN-128
Disable UCC/EAN-128

Set Length Range for UCC/EAN-128

The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Set the Maximum Length (Default: 80)
Example: Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric barcodes "0" and "8" from the "Digit Barcodes" section in Appendix.
3. Scan the Set the Maximum Length barcode.
4. Scan the numeric barcodes "0" and "C" from the "Digit Barcodes" section in Appendix.
32