**【Enter Setup】
Matrix 2 of 5 (European Matrix 2 of 5)
Restore Default Settings
Scan the barcode below to restore all parameters in Matrix 2 of 5 configuration to the factory default settings. To find
the related default settings, see the "Default Parameters Table" section in Chapter 7.
Enable/Disable Matrix 2 of 5
Matrix 2 of 5 is enabled by default.
**【Enable Matrix 2 of 5】
Note: If the scanner fails to identify Matrix 2 of 5 barcodes, you may first try this solution by scanning the Enter Setup
barcode and then Enable Matrix 2 of 5 barcode.
【Exit Setup】
【Restore the Default Settings of Matrix 2 of 5】
【Disable Matrix 2 of 5】
108